Epoxy Coating Cost: $6,000 + GST
This project was at an oil refinery in Spotswood Melbourne Victoria. We were required to make a non-slip coating around some oil pumps. We also applied a protective coating to the walls and repaired and coated the gutter a safety yellow colour.
The epoxy floor coating was a 100 solids troweled finish with a course glass addittive. The surface was not tested to a non-slip level however it would have been greater that R12.
The curb was painted safety yellow with a dulax product. We first used an epoxy grout to fill in the damaged areas of the kerb.