Truganina warehouse floor sealing

This project was to apply a sealer to a new warehouse in Truganina.

We started with a new warehouse floor that had tire marks from the cranes that erected the roof of the warehouse.

We cleaned the surface with an acid wash and then used thinners to remove the tire marks from the warehouse floor.

We cleaned the floor with a mecahncial orbitable walk behind scrubber before applying the sealer.

We applied the sealer with a 600mm roller to evenly spread the sealer.

We applied 3 coats of the sealer. We apply a primer coat with about 60% thinners to give a high penetration coat that soaks into the concrete. This prevents any peeling in the future. We then applied 2 coats of the sealer.

 

 

 

We completed this work over a long weekend to limit any interruption to the mechanics schedule.

After we applied the epoxy coating we applied the yellow lines between each vehicle lift.

This type of epoxy floor coating will cost about $10,000. We did this floor over a long weekend to avoid disrupting the schedule of the mechanics.